S30 Agricultural Drone

Efficient Plant Protection, Intelligent Farming Solution

Image Name
Image Name

Maximum operational efficiency of 14 ha/hour

Image Name

Turbine flow meter (±2% accuracy at 0.5-5L/min)

Image Name

Supports RTK, Waypoint mapping, Smart Battery/RTH.

Image Name

Terrain-Following Radar & Obstacle

Flexible Body Design

Foldable arms/props. Total weight 31kg. Maximum takeoff weight: 66kg, ax thrust-to-weight ratio 2.12

Long-duration operation

Hover time: 21 minutes (no load), 7 minutes (full load)

Strong Environmental Adaptability

Wind Resistance up to 8m/s. Operational altitude up to 4500m

Image Name
Image Name

High-Performance Power System

① 14S1P battery (30Ah capacity, 20C discharge rate) ② Equipped with Smart Protective Board

Lightweight Fuselage

① Carbon-Plastic composite rotor blades (4 main rotors) ② Total Weight (including battery): 31kg

Suitable for Diverse Climatic and Geographical Conditions

No additional accessories required

Image Name

Convertible Tank

Image Name

Seeds

Image Name

Fish&Shrimp Feed

Image Name

Snow Melter

Image Name

Liquid Fertilizer

Image Name

Liquid Pesticide

Image Name

Granular Fertilizer

Professional Configuration

Image Name

S30 Battery

Image Name

S30 Remote Control

Image Name

S30 Charger

Start a New Era of Efficient & Smart Plant Protection

Please terminate spraying flight operations when wind speeds exceed 10 meters per second.

Please adhere to the spraying standards regarding flight altitude, speed, distance, and other relevant parameters.

Constantly monitor the power system for any signs of shaking or resonance, and assess whether safe flight can be achieved.

When working, allow for buffer zones and try to avoid flying toward obstacles.

Ground crew should promptly relay flight information back to the flight controller.

In cases where landing is necessary to replenish supplies such as medication or power, ensure the safety of the landing area.

When replacing the battery or replenishing the liquid solution, make sure to confirm that the rotor has completely stopped rotating before proceeding.

Take a break after working for one hour (at least 15 minutes).